BenQ WDC10 User Manual - Page 51

EDID Management, Management, Reset, Standby Mode, Network Standby Mode, On Default, Setting

Get BenQ WDC10 PDF manuals and user guides View all BenQ WDC10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

You are suggested to have EDID Management On to sync the EDID of the InstaShow Button and the display. If you have EDID Management Off, EDID will not be changed. If you have EDID Management Reset, EDID will be restored to factory default setting. Setting On (Default) Off Reset Description InstaShow™ automatically configures the source notebook's resolution setting to match the display device pixel-by-pixel for perfectly clear picture quality. InstaShow™ do not configure the source notebook's resolution setting to match the display device pixel-by-pixel for perfectly clear picture quality. EDID will be restored to factory default setting. Standby Mode allows you to set the conditions that place the InstaShow Host in standby. You can have your Standby Mode Off to prevent the InstaShow Host from going into standby or choose between Network Standby Mode and HDMI Standby Mode. Network Standby Mode disables the HDMI output from the InstaShow Host after a set amount of time in which there is no connection with an InstaShow Button. When the InstaShow Host is in Web management 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
51
Web management
You are suggested to have
EDID Management
On
to sync the EDID of the InstaShow Button and
the display. If you have
EDID Management
Off
, EDID will not be changed. If you have
EDID
Management
Reset
, EDID will be restored to factory default setting.
Standby Mode
allows you to set the conditions that place the InstaShow Host in standby. You can
have your
Standby Mode
Off
to prevent the InstaShow Host from going into standby or choose
between
Network Standby Mode
and
HDMI Standby Mode
.
Network Standby Mode
disables the HDMI output from the InstaShow Host after a set amount of
time in which there is no connection with an InstaShow Button. When the InstaShow Host is in
Setting
Description
On (Default)
InstaShow™ automatically configures the source notebook's
resolution setting to match the display device pixel-by-pixel for
perfectly clear picture quality.
Off
InstaShow™ do not configure the source notebook's resolution
setting to match the display device pixel-by-pixel for perfectly clear
picture quality.
Reset
EDID will be restored to factory default setting.