BenQ WDC10 User Manual - Page 38

Logging into the web management interface via a wireless network, Settings, Wi-Fi, Connect.

Get BenQ WDC10 PDF manuals and user guides View all BenQ WDC10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Logging into the web management interface via a wireless network InstaShow™ only supports 802.11ac. If your laptop or mobile device has 802.11ac (5G Wi-Fi) wireless capability, you can locate the InstaShow Host via the WDC10_xxxxxx SSID (shown on the upper right corner of the Guide/Idle screen) in your laptop or mobile device's wireless network menu and connect to it. The default password is the same as the name of the SSID (for example, if the SSID is "WDC10_02A00C", the password will be "WDC10_02A00C"). When the device is connected to the InstaShow Host, enter the IP Address, "192.168.168.2" in a web browser, then enter the user name and password as shown in step 4 of Logging into the web management interface via direct connection on page 35. When an InstaShow Host is properly installed it will broadcast 2 separate SSIDs: one for access to the web management interface (with a name of "WDC10_xxxxxx"), and another used for data transfer between the InstaShow Host and InstaShow Buttons (with a name of "WHE_AP_5G_xxxxxx"). For access to the web management interface ensure that your laptop or mobile device only connects to the "WDC10_xxxxxx" SSID. The following is an example of how you can log into the web management interface via a mobile device with IEEE 802.11ac. 1. Go to Settings > Wi-Fi, and you can find the SSID of your InstaShow Host: WDC10_02A00C. 2. Enter the default password "WDC10_02A00C" and press Connect. 3. Access the web management interface following step 4-5 of Logging into the web management interface via direct connection on page 35. 38 Web management

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
38
Web management
Logging into the web management interface via a wireless network
InstaShow™ only supports 802.11ac. If your laptop or mobile device has 802.11ac (5G Wi-Fi)
wireless capability, you can locate the InstaShow Host via the WDC10_xxxxxx SSID (shown on the
upper right corner of the Guide/Idle screen) in your laptop or mobile device’s wireless network menu
and connect to it. The default password is the same as the name of the SSID (for example, if the SSID
is "WDC10_02A00C", the password will be "WDC10_02A00C"). When the device is connected to
the InstaShow Host, enter the IP Address, "192.168.168.2" in a web browser, then enter the user
name and password as shown in step 4 of
Logging into the web management interface via direct
connection on page 35
.
The following is an example of how you can log into the web management interface via a mobile
device with IEEE 802.11ac.
1.
Go to
Settings
>
Wi-Fi
, and you can find the SSID of your InstaShow Host: WDC10_02A00C.
2.
Enter the default password "WDC10_02A00C" and press
Connect.
3.
Access the web management interface following step 4-5 of
Logging into the web management
interface via direct connection on page 35
.
When an InstaShow Host is properly installed it will broadcast 2 separate SSIDs: one for access to the web
management interface (with a name of “WDC10_xxxxxx”), and another used for data transfer between the
InstaShow Host and InstaShow Buttons (with a name of “WHE_AP_5G_xxxxxx”). For access to the web
management interface ensure that your laptop or mobile device only connects to the “WDC10_xxxxxx” SSID.