Bosch WTVC6330US User Manual - Page 19
Accessories, Preparing, transport, dryer ć - pedestal
UPC - 825225882800
View all Bosch WTVC6330US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Accessories The following optional accessories for your dryer may be obtained from customer service (see page 32) or from your local dealer. Please follow the installation instructions supplied by the appropriate manufacturer. Side exhaust kit part no. WTZ 1265 Note: See notes on maximum number of elbows on page 18. Bottom exhaust kit part no. WTZ 1270 Note: See notes on maximum number of elbows on page 18. i The bottom exhaust kit cannot be used with a pedestal installed on the dryer or if the dryer is stacked with the washer. Dryer rack part no. WTZ1620 Use the dryer rack to dry washable woolen textiles (e.g. sweaters) and shoes. Pedestal Mounting Kit A storage pedestal with a pull-out drawer is available as an accessory for your dryer. The pedestal adds approximately 15 inches to the height of the dryer. See page 11 for dimensions. d WARNING Appliance must not be mounted on a pedestal in stacked installations. part no. WTZ 1610 is for a solid white color pedestal. Other color pedestals may be available. Reference part no. WTZ 1610"X" in which the X designates an available color (eg: A for Anthracite, S for silver). Please inquire at your dealer for color choices available. You may also consult a current product catalog or visit our website at: www.boschappliances.com If mounting the dryer on a pedestal, follow the instructions supplied with the pedestal. Stacking Kits There are two stacking kits available. Basic Stacking Kit This kit anchors the dryer on top of the washer and adds approximately 0.63 inches (16 mm) to the stacked height. See page 12 for dimensions. part no. WTZ 1601 is for the basic mechanical stacking kit. Pull-Out Shelf Stacking Kit This kit serves to stack the dryer on top of the washer and also provides a pullout shelf. This kit adds approximately 1.52 inches (38.6 mm) to the stacked washer/dryer height. See page 12 for dimensions. This kit may also be combined with the pedestal mounting kit to provide a pull-out shelf as well as a combined increase in height of the dryer of approximately 16.5 inches. i The pedestal can not be combined with the pull-out shelf stacking kit in stacked washer/dryer installations. part no. WTZ 1600 is for the solid white pull-out shelf stacking kit. Other color pull-out shelf stacking kits may be available. Reference part no. WTZ 1600"X" in which the X designates an available color (eg: A for Anthracite, S for silver). Please inquire at your dealer for color choices available. Preparing to transport the dryer ć step by step i These procedures should only be performed by a qualified person. 1. Rotate the program selector to "OFF". 2. Disconnect the power supply (turn the circuit breaker off, unplug the appliance) 3. Turn off the water faucet connected to the water supply hose (Steam models only). Disconnect the water supply hose. 4. Disconnect the exhaust duct from the exhaust air outlet on the dryer. 5. Collect any accessories and package them for shipment with the appliance. 6. Close the door and secure with adhesive tape. 7. Screw the heightĆadjustable feet of the dryer into the housing to prevent them from being damaged during transportation. 8. Reinstallation of the Dryer at the New Location - refer to the Installation Instructions in this manual (see page 7). 19