Bosch WTVC6330US User Manual - Page 20
Operating, Instructions
UPC - 825225882800
View all Bosch WTVC6330US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
OPERATING INSTRUCTIONS Before using d WARNING d WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Panel Before using your dryer, read and follow all installation and operating instructions. A B D E G C F A Cycle Selector Switches the machine on and off and selects the program (see page 22). Can be turned in both directions. To switch off the dryer, rotate the cycle selector to Off". B LED Indicator Lights LED'S light up in sequence to show the current moisture state of the drying process. Wrinkle Block/Finished - at the end of the drying cycle an acoustic signal sounds and the Wrinkle Block/Finished LED lights up. The drum rotates at specific intervals for one hour to prevent the laundry from creasing (see page 23 ). C Lint Filter LED Blinks as a reminder to clean the lint filter after use. Blinks for 10 seconds when the door is opened after a cycle ends, or in the event airflow is reduced enough to create a CLn" or E:12" error (see troubleshooting guide, page 30). D Display 300 and 500 Series LED countdown indicates the estimated remaining time of a running cycle (in minutes). 800 Series Indicates the settings of additional options and the estimated remaining time of programs. (See page 25) Additional Options Menu selects one of the additional options Select changes the settings of the selected option E Option buttons Add functions to the cycle selected. The option button LED is lit when the option is selected. Press the option button again to turn the option off (LED turns off). Delicates: Press for temperature-sensitive textiles (e.g. acrylic fibers). The temperature of the drying process is reduced, the drying time is extended correspondingly. ECO Action: Press for additional energy savings (use only for cotton and permanent press cycles). Press the option button prior to starting an automatic cycle. F Signal 300 and 500 Series Press both option buttons at the same time to enable the acoustic signal. When the cycle is finished, an audible beeping tone will be emitted (see page 22). Press both buttons again to disable the signal. 800 Series The 800 Series signal is set using the LCD menu (see page 25). G Start/Pause Button Starts, interrupts and ends the drying process. Start/Pause LED Status Lit Red: Program is running and "Pause" can be activated. Blinking: Settings can be changed, the drying cycle can be started, or program is in Pause" mode. Not Lit: Cycle is finished or there is no cycle selected. 20