Bowflex Ultimate Assembly and Owners Manual - Page 100
Assembling Your Bowflex, Ultimate, Lat Assembly
View all Bowflex Ultimate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
A-12 Assembling Your Bowflex® Ultimate™ Lat Assembly Step 1: LAT TOWER ASSEMBLY Locate the following parts for this step: • Lat cross bar w/ pulleys (Item #17) • Upper lat tower (Item #19) • Two (2) 3/8"X2-3/4" bolts (Item #50) • Four (4) 3/8" washers (Item #54) • Two (2) 3/8" nylon lock nuts (Item #57) • Strap hook (Item #20) • Two (2) 1/4"X5/8" phillips head screws (Item #40) Strap Hook Attach the lat cross bar assembly (Item #17) to the upper lat tower (Item #19) with two (2) 3/8"X2-3/4" bolts (Item #50), four (4) 3/8" washers (Item #54) and two (2) 3/8" nylon lock nuts (Item #57) as shown in Figure P. Attach the strap hook (Item #20) to the rear of the upper lat tower using two (2) 1/4"X5/8" phillips head screws (Item #40) also shown in Figure P. Make sure the strap hook loop faces downward as shown in the inset. Note: Take care to securely tighten the lat cross bar to the upper lat tower. Components for this step are in the Lat Attachment Box Unit appears like this following this assembly step 17 57 54 20 40 54 50 19 Figure P Step 2: LAT TOWER INSTALLATION Note: It is recommended that two people be used to accomplish this step. Take care to insure the upper lat assembly is properly and securely attached to the base assembly. Locate the following parts for this step: • Six (6) 3/8"X3/4" bolts (Item #46) • Six (6) 3/8" washers (Item #54) • Upper lat tower assembly (from Step 9) Assemble the upper lat tower assembly to the base unit using six (6) 3/8"X3/4" bolts (Item #46) and six (6) 3/8" washers (Item #54) as shown in Figure Q. *Remove and discard the foam plug from the lat tower cable storage hole. Please go to Step 10 on Page 11 to finish assembly. Figure Q *Foam Plug Unit appears like this following this assembly step