Bowflex Ultimate Assembly and Owners Manual - Page 97
L, M
View all Bowflex Ultimate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Assembling Your Bowflex® Ultimate™ Step 11: ROD BOX INSTALLATION Locate the following parts for this step: • Rod box with Power Rods® (Item #23) • Rod box frame (Item #24) • Three (3) #10X1" self tapping screw (Item #45) • Three (3) 1/4" washers (Item #55) Slide rod box with Power Rods® (Item #23) into rod box frame (Item #24) as shown in Figure L. Tighten three (3) #10X1" screws (Item #45) with three (3) 1/4" washers (Item #55) through the slot in rod box frame (Item #24) and into the screw bosses in the bottom of the rod box with Power Rods® (Item #23) as shown in Figure L. Components for this step are in Box 1 & Box 4 Figure L 23 24 55 45 Step 12: ROD BOX FRAME INSTALLATION Locate the following parts for this step: • Rod Box with Power Rods® with frame (Items #23 & 24) • Three (3) 3/8"X3/4" bolts (Item #46) • Three (3) 3/8" washers (Item #54) Start two (2) 3/8"X3/4" bolts (Item #46) with 3/8" washers (Item #54) into the lower two holes in the rear of the lower lat tower (Item #1) as shown in Figure M. Slide the rod box frame (Assembly #24) onto the two bolts making sure the rod box frame is behind the washers as shown in Figure M. Thread the third 3/8"X3/4" bolt (Item #46) into the top hole of the rod box frame (Item #24). Securely tighten all bolts. CAUTION: When hooking up the Power Rods®, do not stand directly over the tops of the rods. Stand off to the side while connecting and disconnecting the Power Rods® from the cables. Unit appears like this following this assembly step (shown with optional lat tower) Figure M A-9 Unit appears like this following this assembly step 54 46