Bowflex Ultimate Assembly and Owners Manual - Page 95
H, G
View all Bowflex Ultimate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Assembling Your Bowflex® Ultimate™ Step 7: SEAT RAIL INSTALLATION The following parts are required for this step: • Seat Rail (Item #10) • One (1) 3/8"X5" bolt (Item #53) • Two (2) 3/8" washers (Item #54) • One (1) 3/8" nylon lock nut (Item #57) • Large Knob (Item #37) If you have not already done so, remove the twist-tie that holds the rail spacer blocks and tube in place on the side of the seat rail. Slide the seat rail, right side up, into the main frame and rest it on the cross bar as shown in Figure G. Slide the 3/8"X5" bolt (Item #53) with a washer through main frame and seat rail as shown in Figure G. Place 3/8" washer (Item #54) and 3/8" nylon lock nut (Item #57) on bolt and tighten. Place the large knob (Item #37) into the hole in the top of the frame and tighten. 53 54 Figure G 54 57 Unit appears like this following this assembly step A-7 37 Step 8: SEAT INSTALLATION Locate the following parts for this step: • Seat Assembly P ull out and lock the pin on the left side of the seat assembly and slide the seat onto the rail as shown in Figure H. 14 Figure H Unit appears like this following this assembly step Components for this step are in Box 3