Bowflex Ultimate Assembly and Owners Manual - Page 102
Assembling Your Bowflex, Ultimate, Leg Assembly
View all Bowflex Ultimate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
A-14 Assembling Your Bowflex® Ultimate™ Leg Assembly Step 1: LEG EXTENSION FOOT TUBE INSTALLATION Locate the following parts: • Leg extension main frame (Item #62) • Leg extension foot tube (Item #63) • Two (2) 3/8"X3" bolt (Item #51) • Two (2) 3/8" nylon lock nuts (Item #57) • Four (4) 3/8" washers (Item #54) Insert the leg extension foot tube (Item #63) into the leg extension main frame (Item #62) saddle bracket, aligning the holes in the bracket with the holes in the foot tube, as shown in Figure R. Insert two 3/8"X3" bolts (Item #51) with 3/8" washers (Item #54) through the holes in both tubes as shown in Figure R. Install 3/8" washers (Item #54) and then 3/8" nylon lock nuts (Item #57) onto the bolts and securely tighten. 62 Figure R 57 54 54 51 Components for this step are in the Leg Extension Box 63 Unit appears like this following this assembly step Step 2: LEG ASSEMBLY EXTENSION TUBE Locate the following parts • Leg extension main frame (Item #62) • Leg extension pivot tube (Item #64) • 3/8"X3" bolt (Item #51) • 3/8" nylon lock nut (Item #57) • Two (2) 3/8" washers (Item #54) Untwist the twist-tie that is holding the bushings in place in the leg extension pivot tube (Item #64). Place the leg extension tube (Item #64) as shown in Figure S. The tube is symmetrical so orientation does not matter. Insert the 3/8"X3" bolt (Item #51) with a 3/8" washer (Item #54) on it through the leg extension main frame (Item #62) and through the leg extension tube (Item #64) as shown in Figure S. Install a 3/8" washer (Item #54) onto the bolt and securely tighten the 3/8" nylon lock nut (Item #57). Components for this step are in the Leg Extension Box 57 54 54 64 51 Figure S Unit appears like this following this assembly step