Bowflex Ultimate Assembly and Owners Manual - Page 94
E, F
View all Bowflex Ultimate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
A-6 Assembling Your Bowflex® Ultimate™ Step 5: REAR LEG 13 Locate the following parts for this step: • Bench leg (Item #13) 54 • Seat rail (Item #10) • Four (4) 3/8" nylon lock nuts (Item #57) 57 • Four (4) 3/8" washers (Item #54) Find the four bolts in the channels on the bottom of the seat rail assembly closest to the warning sticker. Place the rear leg mounting bracket (Item #13) over the four bolts. Make sure the edge of the bracket is ½" to 1" from the end of the rail. Place four (4) 3/8" washers (Item #54) and four (4) 3/8" nylon lock nuts (Item #57) on the bolts as shown in figure E and tighten. Figure E Components for this step are in Box 4 Unit appears like this following this assembly step Step 6: FOOT REST Locate the following parts for this step: • Leg press assembly (Item #11) • Seat rail (Item #10) • Four (4) 3/8" nylon lock nuts (Item #57) • Four (4) 3/8" washers (Item #54) Find the four bolts in the channels on the bottom of the seat rail assembly that are closest to the threaded hole. Place the leg press assembly (Item #11) on the four bolts. Place four (4) 3/8" washers (Item #54) and four (4) 3/8" nylon lock nuts (Item #57) on the bolts as shown in Figure F. Make sure the ends of the bolt keepers holding the leg press bolts in place are flush with the end of the seat rail. This will determine the final alignment of the leg press assembly. 10 Figure F 11 54 57 Components for this step are in Box 4 Unit appears like this following this assembly step