Brother International 8050N Users Manual - English - Page 121
What to Do When an Error Message Appears, Error Messages
![]() |
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
What to Do When an Error Message Appears LCD messages Standard paper tray Optional paper tray Optional duplex unit for Duplex printing Offset catch tray Error Messages TRAY 1 and TRAY 2 TRAY 3 and TRAY 4 DX CT Message NO TONER ILLEGAL TONER NO PAPER XXX NO TRAY XXX COVER OPEN BACK LEVER ERROR JAM XXX STACKER FULL SIZE MISMATCH MEDIATYPE ERROR MANUAL FEED SIZE ERROR TX SIZE ERROR DX SIZE ERROR CT LT-8000 FAIL DX-8000 FAIL CT-8000 FAIL DIMM ERROR CARD ERROR Meaning and Action Install the toner cartridge correctly. See Replacing the Toner Cartridge (TN-1700) on page 6-1. Use only a Brother genuine toner cartridge. Put paper in the empty tray. Put the paper tray in the printer. Close the top cover of the printer. Close the back cover of the printer. Ensure that the cover of the DX is closed. Close the CT cover of the printer. Lower the Back lever. Carefully pull out the jammed paper from the indicated area. See Clearing Paper Jams on page 5-17. Take some paper out of the output tray. Put the same size paper in the paper tray that is selected in the printer driver, and then press the Go button. Specify the correct type of media. Put the same size of paper in the paper tray as is shown on the LCD. If the printer is 'paused', press the Go button. Put the same size paper in the paper tray that is selected in the printer driver. See Suitable and Unsuitable Paper Types on page 2-1. You can only print in the sizes specified for Duplex printing. Check printer driver setting and paper size in the tray. See Suitable and Unsuitable Paper Types on page 2-1. The CT does not accept the paper size specified. Select the corrected paper size in the printer driver. See Suitable and Unsuitable Paper Types on page 2-1. Optional Lower Tray is removed. Turn off the printer, and then turn it on again. Optional Duplex unit is removed. Turn off the printer, and then turn it on again. Optional Offset Catch Tray is removed. Turn off the printer, and then turn it on again. Re-install the DIMM correctly. Turn off the printer. Wait a few seconds, and then turn it on again. If this error message appears again, replace the DIMM with a new one. Make sure of the following: ■ The CompactFlash card is installed properly. ■ The installed CompactFlash card is formatted properly. Turn off the printer. Wait a few seconds, then turn it on again. If this error message appears again, replace the CompactFlash card with a new one. 5 - 15 TROUBLESHOOTING
![](/manual_guide/products/brother-international-hl8050n-users-manual-english-83e520a/121.png)