Brother International 8050N Users Manual - English - Page 31
Connecting the AC Power Cord
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting the AC Power Cord WARNING Three power specifications are listed below. The specifications that apply to your printer depend on its configuration. Connect the power plug only to a properly rated power outlet. Otherwise, it can cause fire or electric shocks. If in doubt, contact your dealer or Brother Customer Service. ■ Rated voltage: 100 V Rated frequency: 50/60 Hz ■ Rated voltage: 110 V Rated frequency: 60 Hz ■ Rated voltage: 220 - 240 V Rated frequency: 50/60 Hz To prevent fire or electric shock, connect the AC power cord to a grounded/earthed AC power outlet/socket. For your safety, if in any doubt about the effective grounding/earthing of the power, call a qualified electrician. 1 Connect the AC power cord to the back of the printer. 2 Make sure that the power switch has been firmly pushed to the O position and then insert the other end of the AC power cord in the power outlet. If the AC power cord has a ground/earth wire, connect it as well. 1 - 4 BASIC PRINTER OPERATION