Brother International 8050N Users Manual - English - Page 94

QUALITY RESOLUTION HRC Menu 300/600/1200 MEDIUM/DARK/OFF/LIGHT TONER SAVE DENSITY OFF/ON -2 to 2 Description You can select a print resolution of 300, 600 or 1200 dpi (dots per inch). HRC: High Resolution Control (HRC) offers improved print quality of letters, numbers and graphics that conventional laser printers cannot achieve, with a resolution of 300 or 600 dpi. Reduce costs by turning this on. Increase or decrease the print density. SETUP LANGUAGE PANEL CONTROL ERROR BUZZER PANEL BUZZER POWER SAVE TIME AUTO CONTINUE TONER LOW Menu ENGLISH/FRANÇAIS/... LOWER LCD AUTO ONLINE NONE/PAGE COUNTER/JOB NAME ON/OFF BUTTON REPEAT MESSAGE SCROLL OFF NORMAL SPECIAL OFF ON 1:30:60MIN. OFF/ON CONTINUE/STOP Description Select the language you want the display of the LCD to show. Select what you want to appear on the second line of your LCD display. The printer will automatically go online after a print job if you set this to ON. Set the time for the display message to change when holding the + or - button at intervals of: 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 or 2.0 seconds. The factory setting is 0.1. Set the time in seconds that an LCD message will scroll across the display. From Level 1=0.2 to Level 10=2.0. The factory setting is Level 1. Select this if you do not want the buzzer to activate when there is an error at the printer. There will be three sets of five Buzzes when an error occurs. Buzzes five times consecutively until the error is cleared. Disables buzz function when you press the button. Enables buzz function when you press the button. Select the length of time the printer will wait until it goes into Power Save mode. CONTINUE: Continue printing even if there is a TONER LOW error. STOP: Stop printing if there is a TONER LOW error. CONTROL PANEL 4 - 14