Brother International 8050N Users Manual - English - Page 78
Automatic Emulation Selection, EMULATION, SETUP - hp laserjet
![]() |
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Automatic Emulation Selection This printer has an Automatic Emulation Selection feature. When the printer receives data from the computer, it automatically chooses the emulation mode. This feature has been set at the factory to ON. The printer can choose from the following combinations: EPSON (default) HP LaserJet BR-Script 3 HP-GL EPSON FX-850 IBM HP LaserJet BR-Script 3 HP-GL IBM Proprinter XL You can select the emulation mode manually by using the control panel to access EMULATION in the SETUP menu. See SETUP on page 4-14. When you use the Automatic Emulation Selection, note the following: ■ The EPSON or IBM emulation mode priority must be selected, because the printer cannot distinguish between them. Since the factory setting is EPSON emulation mode, you might need to select the IBM emulation mode by using the control panel to access EMULATION in the SETUP menu. ■ Try Automatic Emulation Selection with your application software or network server. If it does not work properly, select the emulation mode manually by using either the printer control panel buttons or the emulation selection commands from your software. PRINTER DRIVER AND SOFTWARE 3 - 16
![](/manual_guide/products/brother-international-hl8050n-users-manual-english-83e520a/78.png)