Brother International 8050N Users Manual - English - Page 145
Replacing the Fuser Unit & Transfer Roll Cartridge (FP-8000)
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Replacing the Fuser Unit & Transfer Roll Cartridge (FP-8000) The fuser unit and transfer roll cartridge are consumables. For more information about consumables, see Introduction to the Optional and Consumable Items on page A-1. For details about when to change consumables, see Life Span of Consumable Items on page A-31. Fuser Unit & Transfer Roll Cartridge Handling Precautions WARNING ■ Never touch the labeled area found on or near the heat roller. You can get burnt. To avoid injuries or burns, if a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself. Switch off the printer immediately, and contact Brother Customer Service. ■ Be sure to switch off and unplug the printer before accessing the interior of the printer for cleaning, maintenance, or fault clearance. Access to a live printer's interior can cause electric shock. ■ Never throw a transfer roll cartridge into a naked/open flame. It can cause an explosion and you can get burnt. Handling Precautions ■ Do not replace the fuser unit immediately after using the printer. You may get burnt. ■ Do not remove and reinsert the transfer roll cartridge in use. ■ When the message to replace the transfer roll cartridge appears, replace the transfer roll cartridge immediately. Otherwise, the printer will stop printing. Replacing the Fuser Unit & Transfer Roll Cartridge 1 Turn off the printer power switch and leave it for 30 minutes until the fuser unit cools down. 6 - 5 ROUTINE MAINTENANCE AND CONSUMABLE ITEMS REPLACEMENT