Brother International 8050N Users Manual - English - Page 59

Changing the Configuration for Options Once you set the initial configuration of the printer, you must reconfigure the printer driver when you install the following options: 1. Lower tray units (up to two LT-8000) 2. Memory expansion 3. Duplex unit (DX-8000) 4. Offset Catch Tray (CT-8000) 4 3 2 1 For details about how to install options, see the instructions provided with the options. In the following section, it is assumed that the options are already installed. Memory expansion In general, DIMM must have the following specifications: Type: 100 pin and 32 bit output CAS latency: 2 or 3 Clock frequency: 66 MHz or more Capacity: 16, 32, 64, 128 or 256 MB Height: 46 mm (1.8 in.) or less Parity: NONE Dram Type: SDRAM 4 Bank SDRAM can be used. ■ For more information, call the dealer you bought the printer from. ■ For the latest information and drivers, visit the Brother Solutions Center at http://solutions.brother.com 2 - 26 USABLE PAPER TYPES AND PRINTING METHOD