Brother International 8050N Users Manual - English - Page 136
Make sure that the levers at both ends of the fuser unit, clearing the jam.
UPC - 012502608189
View all Brother International 8050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
5 Close the offset catch tray cover. 6 Open the back cover by lifting up the lower gray lever at the top left corner of the back of the printer. 7 Remove any jammed paper. If paper is torn, check for any remaining torn pieces of paper. ■ The fuser unit is hot. Be careful not to touch it as you can get burnt. ■ Make sure that the levers at both ends of the fuser unit are returned to the positions they were in before clearing the jam. If you let go of the cover of the fuser unit, it will return to its original position. TROUBLESHOOTING 5 - 30
TROUBLESHOOTING
5 - 30
5
Close the offset catch tray cover.
6
Open the back cover by lifting up the lower gray lever at
the top left corner of the back of the printer.
7
Remove any jammed paper. If paper is torn, check for any
remaining torn pieces of paper.
■
The fuser unit is hot. Be careful not to touch it as you
can get burnt.
■
Make sure that the levers at both ends of the fuser unit
are returned to the positions they were in before
clearing the jam.
If you let go of the cover of the fuser unit, it will return to its
original position.