Brother International DCP 330C Quick Setup Guide - English - Page 19

Brother International DCP 330C - Color Inkjet - All-in-One Manual

Get Brother International DCP 330C - Color Inkjet - All-in-One PDF manuals and user guides View all Brother International DCP 330C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Installing the Driver & Software Windows® For Network Interface Users (DCP-540CN only) (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) Important Make sure that you have finished the instructions from Step 1 Setting Up the Machine on pages 4 through 11. 1 Unplug the machine from the AC outlet. 2 Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. 4 Carefully route the network cable through the trench and out the back of the machine as shown below. Then, connect the cable to your network. Windows® Network 3 Insert the network cable into the LAN socket marked with a symbol. You will find the LAN socket inside the machine on the left as shown below. Improper Setup Make sure that the cable does not restrict the cover from closing, or an error may occur. Note If both USB and LAN cables are being used, guide both cables through the trench with one on top of the other. 5 Lift the scanner cover to release the lock ( ). Gently push the scanner cover support down ( ) and close the scanner cover ( ). 6 Turn on the machine by connecting the power cord. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
Installing the Driver & Software
17
Windows
®
Windows
®
Network
For Network Interface Users (DCP-540CN only)
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional
x64 Edition)
Important
Make sure that you have finished the
instructions from Step 1
Setting Up the
Machine
on pages 4 through 11.
1
Unplug the machine from the AC outlet.
2
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
3
Insert the network cable into the LAN socket
marked with a
symbol. You will find the
LAN socket inside the machine on the left as
shown below.
4
Carefully route the network cable through the
trench and out the back of the machine as
shown below.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
5
Lift the scanner cover to release the lock (
).
Gently push the scanner cover support
down (
) and close the scanner cover (
).
6
Turn on the machine by connecting the power
cord.