Home » Brother International Manuals » Laser Printers » Brother International HL 5280DW » Manual Viewer

Brother International HL 5280DW Quick Setup Guide - English - Page 14

Print a test Setting your language on the, control panel

UPC - 012502614456

View all Brother International HL 5280DW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

STEP 1 Setting Up the Machine 4 Print a test page 4 Press Go. The printer prints a test page. Check that the test page has printed correctly. Improper Setup DO NOT connect the interface cable yet. 1 Make sure that the printer power switch is off. Connect the AC power cord to the printer. 2 Plug the AC power cord into an AC power outlet. Turn on the printer power switch. Note This function will not be available after the first print job you send from your PC. 5 Setting your language on the control panel 3 After the printer has finished warming up, the LCD shows READY. 1 Press the + button until the LCD shows SETUP. Press Set. SETUP 2 Press Set again. LANGUAGE 3 Press the + or - button to choose your language. Press Set to accept. =ENGLISH Now go to Go to the next page to install the driver. 12

Section	Page
Symbols used in this guide	2
Safety Precautions	4
To Use the Printer Safely	4
Regulations	5
Federal Communications Commission (FCC) Declaration of Conformity (For USA)	5
Important	5
Industry Canada Compliance Statement (For Canada	5
Radio interference (220-240 volt model only)	5
EC Declaration of Conformity	5
Laser Safety (110 to 120 volt Model Only)	6
FDA Regulations (110 to 120 volt Model Only)	6
Caution	6
IEC 60825-1 specification (220 to 240 volt model only)	6
Caution	6
For Finland and Sweden	6
Varoitus!	6
Varning	6
Internal laser radiation	6
IMPORTANT - For Your Safety	6
Disconnect device	7
Caution for LAN connection	7
IT power system (For Norway only)	7
Wiring information (for UK) Important	7
Warning - This printer must be earthed.	7
Wi-Fi Alliance certification	7
Getting Started	8
What is in the box?	8
Control panel	9
Supplied CD-ROM	10
Setting Up the Machine	11
Put the CD-ROM into the CD-ROM drive	11
For Windows® users	11
For Macintosh® users	11
Install the drum unit and toner cartridge assembly	12
Load paper in the paper tray	13
Print a test page	14
Setting your language on the control panel	14
Installing the Printer Driver	16
Windows®	16
For USB interface cable users (Windows® 98/Me/2000/XP only)	16
For parallel interface cable users	18
For wired network interface cable users	19
For Brother Peer-to-Peer network printer users (LPR/NetBIOS)	19
For shared network printer users	21
For wireless network users (Windows® 98/Me/2000/XP and Windows NT® 4.0 only)	22
Confirm your network environment	23
Installation temporarily using a network cable	24
Installing the printer driver	26
Installation using a wireless computer	28
Installing the printer driver	31
For USB interface cable users	33
For Mac OS® X 10.2.4 or greater users	33
For Mac OS® 9.1 to 9.2 users	35
For wired network interface cable users	36
For Mac OS® X 10.2.4 or greater users	36
For Mac OS® 9.1 to 9.2 users	38
For wireless network users (Mac OS® X 10.2.4 or greater users)	39
Confirm your network environment	40
Installation temporarily using a network cable	41
Installing the printer driver	43
Installtion using a wireless computer	45
Installing the printer driver	48
For Network Users	50
BRAdmin Professional configuration utility (For Windows® users)	50
Installing the BRAdmin Professional configuration utility	50
Setting your IP address, Subnet Mask and Gateway using BRAdmin Professional	50
BRAdmin Light configuration utility (For Mac OS® X users)	51
Setting your IP address, Subnet Mask and Gateway using BRAdmin Light	51
Web browser	52
Network default settings	52
Print the Printer Settings Page	52
Consumables and Options	53
Options	53
Consumables	53
Repacking Information	54