Brother International HL-7050N Quick Setup Guide - English - Page 2

Safety Precautions To Use the Printer Safely Warning Indicates warnings that must be observed to prevent possible personal injury. Warning Note Indicates cautions that must be observed to use the printer properly or prevent damage to the printer. Hint Indicates notes and useful tips to remember when using the printer. User's Guide Network User's Guide Indicates reference to the User's Guide or Network User's Guide which is on the CD-ROM we have supplied. There are high voltage electrodes inside the printer. Before replacing internal parts, cleaning the printer or clearing a paper jam, make sure you have turned OFF the power switch and unplugged the power cord from the power outlet. Do not handle the plug with wet hands. Doing this might cause an electrical shock. After you have just used the printer, some internal parts of the printer are extremely hot. When you open the front cover or rear cover of the printer, never touch the shaded parts shown in the following illustration. Inside the printer Open the face up output tray To prevent injuries, at least two people should lift the printer, holding the handles on both the right and left sides of the printer, and the front of the printer as shown in the illustration. Be careful not to trip on the legs of the optional Stabilizer unit. Note Do not stand on the printer or the optional stabilizer.