Brother International IntelliFAX 1840c Users Manual - English - Page 95

Remote commands Follow the commands below to access features when you are away from the machine. When you call the machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command. Remote commands 91 Playing Voice Messages (FAX-1940CN only) 1 Repeat or Skip Backward 2 Skip Forward 9 STOP Playing 93 Erase all ICM (FAX-1940CN only) 94 Play and Record OGM in Memory (FAX-1940CN only) 1 Play 1 Msg Ctr OGM 2 F/T OGM 2 Record 1 Msg Ctr OGM 2 F/T OGM Operation details After one long beep, the machine plays the ICM. Press 1 while listening to an ICM to repeat it. If you press 1 before a message, you will hear the previous message. While playing the ICM, you can skip to the next message. Stop playing the ICM. If you hear one long beep, the erase is accepted. If you hear three short beeps, you cannot erase because all voice messages have not been played, or there are no voice message to erase. * This code erases all recorded messages, not one at a time. The machine plays the selected OGM. You can stop playing OGMs by pressing 9. After one long beep, you can record the selected OGM. You will hear the message played once. You can stop recording the message by pressing 9. 6 - 7 REMOTE FAX OPTIONS