Brother International IntelliFAX 1840c Users Manual - English - Page 96
Except for FAX-1940CN, Forwarding, Paging or Fax
UPC - 012502610892
View all Brother International IntelliFAX 1840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Remote commands Operation details 95 Change the Fax Forwarding, Paging or Fax Storage settings 1 OFF You can select Off after you have retrieved or erased all your messages. 2 Fax Forwarding 3 Paging 4 Fax Forwarding number 6 Fax Storage If you hear one long beep, the change has been accepted. If you hear three short beeps, you cannot change it because something has not been set up (for example, perhaps a Fax Forwarding or paging number had not been registered). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number on page 6-10.) Once you have registered the number, Fax Forwarding will work. You can select Off after you have retrieved or erased all your messages. 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax message(s). (See page 6-10.) 3 Erase faxes from the memory If you hear one long beep, fax messages have been erased from the memory. 97 Check the receiving status (Except for FAX-1940CN) 1 Fax You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. 97 Check the receiving status You can check whether your machine has (FAX-1940CN only) received any fax or voice messages. If yes, 1 Fax 2 Voice you will hear one long beep. If no, you will hear three short beeps. REMOTE FAX OPTIONS 6 - 8