Brother International LS2300PRW Users Manual - English and Spanish - Page 30
Darning, Over edge stitch
View all Brother International LS2300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
UTILITY STITCHES Darning Reinforce points that will be subject to strain. Stitch width Stitch length Needle position Presser foot Needle Other 0 F-2 M None Single Darning plate Place the darning plate on the needle plate as a shown below, and then remove both the presser foot and presser foot holder assembly. Over edge stitch The Overlock Stitch is used to prevent the edge of the fabric from fraying. Stitch width 3-5 Stitch length 3-4 Needle position L Presser foot Zigzag Needle Single Place the edge of the fabric under the presser foot so the needle enters the fabric when the left side of the zigzag stitch is sewn and misses the edge of the fabric with the right side of the stitch. Sew with this needle position along the edge of the fabric. Place the fabric to be darned under the b presser foot together with a fabric underlay for reinforcement. Start sewing while gently moving the fabric c with your hands, alternately drawing the fabric away and pulling it toward you. Stop sewing when the portion to be darned is d filled with parallel stitching. 29