Brother International LS2300PRW Users Manual - English and Spanish - Page 35
AppliquÉ, Monogramming And Embroidering
View all Brother International LS2300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
APPLIQUÉ, MONOGRAMMING AND EMBROIDERING Zigzag stitches can be used for sewing appliqués, monogramming and embroidering. Appliqués You can create an appliqué by cutting a different piece of fabric into a shape and using it as a decoration. Stitch width Stitch length Needle position Presser foot Needle 1-3 F-2 M Zigzag Single Baste the cut design to the fabric. a Carefully sew around the edge of the design. b Monogramming and embroidering Stitch width 0-5 Stitch length Set at any position. Needle position M Presser foot None Needle Single 3 Other Darning plate Place the darning plate on the needle plate as a shown below, and then remove both the presser foot and presser foot holder assembly. Memo ● Make reinforcing straight stitches at the beginning and the end of stitching. CAUTION ● Be careful that the needle does not hit a pin during sewing, as the needle can break. You may also be injured. Cut away any fabric that is left outside the c stitching. Draw the lettering (for monogramming) or b design (for embroidering) on the surface of the fabric. Put the fabric in the embroidery hoop with c the surface of the fabric facing up inside the well. Place the project under the needle and lower d the presser bar. Draw up the lower thread through the project e at the starting position by turning the handwheel toward you (counterclockwise), and then sew a few stitches to reinforce the stitching. Remove the basting, if necessary. d 34