Brother International MFC-J885DW Online Users Guide HTML - Page 398
Open System], None], Shared Key], WPA/WPA2-PSK], TKIP+AES], Connected], Settings], All Settings]
View all Brother International MFC-J885DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
8. Do one of the following: • If you selected the [Open System] option, press a or b to select the Encryption type [None] or [WEP], and then press OK. If you selected the [WEP] option for Encryption type, enter the WEP key, and then press OK. • If you selected the [Shared Key] option, enter the WEP key, and then press OK. • If you selected the [WPA/WPA2-PSK] option, press a or b to select the Encryption type [TKIP+AES] or [AES], and then press OK. Enter the WPA key, and then press OK. • For more information about how to enter text, see the Appendix. • Your Brother machine supports the use of the first WEP key only. 9. To apply the settings, press 1 to select [Yes]. To cancel, press 2. 10. The machine will attempt to connect to the wireless device you have selected. If your wireless device is connected successfully, the machine's LCD displays [Connected]. For Windows®: You have completed the wireless network setup. Use the Brother Installation CD-ROM to install drivers and software necessary for operating your device. For Macintosh: You have completed the wireless network setup. Go to your model's Downloads page on the Brother Solutions Center at http://support.brother.com to install drivers and software necessary for operating your device. MFC-J680DW/MFC-J880DW/MFC-J885DW Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1. Check and record the current wireless network settings. Network Name (SSID) Communication Mode Infrastructure For example: Network Name (SSID) HELLO Communication Mode Infrastructure Authentication Method Open System Shared Key WPA/WPA2-PSK Encryption Mode NONE WEP WEP AES TKIP (TKIP is supported for WPA-PSK only.) Authentication Method WPA2-PSK Encryption Mode AES Network Key - Network Key 12345678 If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. 2. Press [Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard]. 392