Brother International MFC-J885DW Online Users Guide HTML - Page 464
Where to Place the Paper, Repeat Jam A Inside
View all Brother International MFC-J885DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
Error Message Ink Absorber Pad NearFull Ink Low Jam A Inside/Front Repeat Jam A Inside/ Front Jam B Front Repeat Jam B Front Jam C Rear Low Temperature Media card error Cause Action The ink absorber box or flushing box is nearly full. The ink absorber box or flushing box must be replaced soon. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. One or more of the ink cartridges are near Order a new ink cartridge. You can the end of their lives. If one of the color continue printing until the Touchscreen ink cartridges is near the end of its life and displays Cannot Print. someone is sending you a color fax, your machine's "handshake" will ask that the fax be sent as black & white. If the sending machine has the ability to convert it, the color fax will be printed at your See Related Information: Replace the Ink Cartridges. • You can still scan even if the ink is low or needs to be replaced. machine as a black & white fax. The paper is jammed in the machine. Remove the jammed paper. See Related Information: Paper is Jammed Inside and in the Front of the Machine (Jam A Inside/Front). Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper. More than one sheet of paper was placed in the manual feed slot. -OR- Another sheet of paper was placed in the manual feed slot before the Touchscreen displayed Where to Place the Paper. Do not put more than one sheet of paper in the manual feed slot at any one time. Wait until the Touchscreen displays Where to Place the Paper before you feed the next sheet of paper in the manual feed slot. Remove the jammed paper. See Related Information: Paper is Jammed Inside and in the Front of the Machine (Jam A Inside/Front). The paper is jammed in the machine. Remove the jammed paper. See Related Information: Paper is Jammed in the Front of the Machine (Jam B Front). Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper. The paper is jammed in the machine. Remove the jammed paper. See Related Information: Paper is Jammed in the Back of the Machine (Jam C Rear). Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. The room temperature is too low. After warming the room, allow the machine to warm up to room temperature. Try again when the machine has warmed up. Multiple data storage devices were in the Remove the memory card(s) or USB flash machine when it was turned on. The drive that you are not using. 458