Brother International MFC-J885DW Online Users Guide HTML - Page 457
Data Remaining, Disconnected, Document Jam, DR Mode in Use, High Temperature, Ink Absorber Full
View all Brother International MFC-J885DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 457 highlights
Error Message Data Remaining Disconnected Document Jam DR Mode in Use High Temperature Ink Absorber Full Ink Low Cause Action Print data is left in the machine's memory. Press Stop/Exit. The machine will cancel the job and clear it from the memory. Try to print again. The other person or other person's fax machine stopped the call. Try to send or receive again. If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP). See Related Information: Telephone Line Interference/VoIP. The document was not inserted or fed correctly, or the document scanned from the ADF was too long. Remove the jammed document, and then press Stop/Exit. Set the document in the ADF correctly. See Related Information: Load Documents in the Automatic Document Feeder (ADF). See Related Information: Document Jams. The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. See Related Information: Turn off Distinctive Ring. The room temperature is too high. After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down. The ink absorber box or flushing box is The ink absorber box or flushing box must full. These components are periodic be replaced. Call Brother Customer maintenance items that may require Service or a Brother Authorized Service replacement after a period of time to Center to have your machine serviced. ensure optimum performance from your Brother machine. Because these components are periodic maintenance items, the replacement is not covered under the warranty. The need to replace Reasons for cleaning are: 1. The machine automatically cleans itself after you remove the power cord and plug it back in. these items and the time period before 2. After a paper jam has been cleared, replacement is dependent on the number the machine automatically cleans itself of purges and flushes required to clean before the next received page is the ink system. These boxes acquire printed. amounts of ink during the different purging 3. The machine automatically cleans and flushing operations. The number of itself after sitting idle for more than 30 times a machine purges and flushes for days (infrequent use). cleaning varies depending on different situations. For example, frequently powering the machine on and off will cause numerous cleaning cycles since the 4. The machine automatically cleans itself after ink cartridges of the same color have been replaced 12 times. machine automatically cleans upon power up. The use of non-Brother ink may cause frequent cleanings because non-Brother ink could cause poor print quality which is resolved by cleaning. The more cleaning the machine requires, the faster these boxes will fill up. Repairs resulting from the use of nonBrother supplies may not be covered under the stated product warranty. One or more of the ink cartridges are near Order a new ink cartridge. You can the end of their lives. If one of the color continue printing until the LCD displays ink cartridges is near the end of its life and Cannot Print. someone is sending you a color fax, your 451