Brother International MFC-J885DW Online Users Guide HTML - Page 458
Jam A Inside/Front, Repeat Jam A, Jam B Front, Repeat Jam B, Jam C Rear, Low Temperature, No Caller
![]() |
View all Brother International MFC-J885DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 458 highlights
Error Message Jam A Inside/Front Repeat Jam A Jam B Front Repeat Jam B Jam C Rear Low Temperature No Caller ID No Device (Wi-Fi Direct) Cause Action machine's "handshake" will ask that the See Related Information: Replace the Ink fax be sent as black & white. If the Cartridges. sending machine has the ability to convert • You can still scan even if the ink is it, the color fax will be printed at your low or needs to be replaced. machine as a black & white fax. The paper is jammed in the machine. Remove the jammed paper. See Related Information: Paper is Jammed Inside and in the Front of the Machine (Jam A Inside/Front). Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper. The paper is jammed in the machine. Remove the jammed paper. See Related Information: Paper is Jammed in the Front of the Machine (Jam B Front). Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper. The paper is jammed in the machine. Remove the jammed paper. See Related Information: Paper is Jammed in the Back of the Machine (Jam C Rear). Make sure the paper length guide is set to the correct paper size. DO NOT extend the paper tray when you load A5 or smaller size paper. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. The room temperature is too low. After warming the room, allow the machine to warm up to room temperature. Try again when the machine has warmed up. There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. If you want to use the Caller ID feature, call your telephone company. See Related Information: Caller ID. When configuring the Wi-Fi Direct • Make sure your machine and mobile network, the Brother machine cannot find device are in the Wi-Fi Direct mode. your mobile device. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the WiFi Direct network, make sure you have entered the correct password. • If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. 452
![](/manual_guide/products/brother-international-mfcj460dw-online-users-guide-html-b708ca2/458.png)