Brother International PE-400D Users Manual - English - Page 10

OTHER INCLUDED ACCESSORIES 1 2 3 R 4 5 6 7 8 9 10 11 12 No. Part Name 1 Blind stitch foot "R" 2 Zipper foot "I" 3 Button sew-on foot 4 Extra spool pin * 5 Cleaning brush 6 Scissors 7 Embroidery foot "Q" 8 Key 9 Owner's Manual 10 Hard case/Extension table 11 Embroidery Unit Cover 12 Embroidery unit 13 Embroidery frame set (Regular) 14 Backing material (Stabilizer material) 15 Net ** 16 Foot controller 17 Embroidery bobbin thread 18 Spool felt* Part Code X56409-001 103561-002 X59375-051 XA3336-051 X59476-051 184783-001 XA5357-001 XA2005-051 - - - - SA432 (USA) XA6628-002 (Others) - XA5523-050 XC1154-051 SABTS (USA) X81164-001 (Others) X57045-051 13 14 15 * Extra spool pin and spool felt Use when embroidering with metallic thread. 1. Insert the extra spool pin into the end of the bobbin winder shaft. 2. Install the spool felt and the thread spool in that order, and then thread the upper thread. 16 17 18 1 Insert the extra spool pin into the end of the bobbin winder shaft 3 2 Spool felt 2 3 Thread spool * When setting the 1 thread spool, set it so that the thread winds off from the front of the spool. * If using metallic thread, we recommend that you use a 90/14 home sewing machine nee- dle. Note This method keeps the thread from twisting as it comes off the spool pin. ** Net If using special threads which wind quickly off the thread spool, attach a net to the spool before using. : Cut the net to match the size of the spool. 1 Net 2 Thread spool 3 Spool pin 4 Spool cap 1 4 If using metallic thread, we recommend that you use a 90/14 home sewing machine needle. 2 3 4 Note (For U.S.A. only) Foot controller : Model N5V This foot controller can be used for sewing machine model PE-300S/PE-400D. 7