Brother International PE-400D Users Manual - English - Page 65
Embroidering - embroidery hoop
View all Brother International PE-400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
EMBROIDERING BEFORE YOU BEGIN J 1. Embroidery unit and memory cards (optional). CAUTION - Do not touch the embroidery unit connectors. Doing so could cause damage to the machine. - Do not move the sewing machine while the embroidery unit is attached. The embroidery unit could fall and cause injury. - Do not carry embroidery unit by the carriage or apply excessive force to it, or you could cause damage. - Keep hands and other items away from the embroidery unit carriage and embroidery hoop while they are in motion. Injury could result. 1 Hoop holder 2 Carriage 3 Connector - Always store memory cards in the accessory case. - Always turn machine off before removing the embroidery unit or memory cards. - Please note that the small embroidery hoop (optional) will not work with certain pattern sizes and sewing positions. - Please note that memory cards will not work with certain pattern sizes, and some memory cards are not compatible with this machine. 2. Attaching the embroidery foot "Q" CAUTION - Always make sure the power is off before changing feet. Injury could result if the "START/STOP" button is accidentally pushed and the machine starts running during this operation. - Do not use the embroidery foot "Q" for anything other than embroidery. 1. Raise needle with the up-needle button. Turn power off. 2. Loosen the screw on the foot holder and remove foot holder. 3. Attach the embroidery foot. Screw back on tightly. 1 Screw * Make sure the needle clamp screw is also tightened. 62