Brother International PE-400D Users Manual - English - Page 23

Upper Threading - q foot

Get Brother International PE-400D - Embroidery And Sewing Machine PDF manuals and user guides View all Brother International PE-400D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

UPPER THREADING 4 3 6 1 5 ઃఆ ࣍ ϖʔδ 2 CAUTION Always make sure to thread the machine properly as shown in the directions. If the machine is not threaded properly, the thread could get stuck, needles could break and bodily injury could result. 1. Raise the presser foot using the presser foot lever. 2. Press the "NEEDLE POSITION" button to raise the needle to the up position.  20 3. Set the thread spool. The thread end should come from the bottom front of the spool. The spool cap closest to the thread spool size should be used to hold the spool securely on the spool post. 1 Spool cap CAUTION While sewing and embroidering, be sure that the spool pin is pulled out and pushed toward the back of the sewing machine.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
20
UPPER THREADING
CAUTION
Always make sure to thread the machine properly as
shown in the directions.
If the machine is not threaded
properly, the thread could get stuck, needles could break
and bodily injury could result.
1.
Raise the presser foot using the presser foot lever.
前�
ページ�
次�
ページ�
刺しゅう�
設
定
�
記
憶
�
戻
る
�
6
4
2
5
1
3
3.
Set the thread spool. The thread end should come from the
bottom front of the spool. The spool cap closest to the thread
spool size should be used to hold the spool securely on the
spool post.
1
Spool cap
CAUTION
While sewing and embroidering, be sure that the spool pin
is pulled out and pushed toward the back of the sewing
machine.
2.
Press the
“
NEEDLE POSITION
”
button to raise the needle to
the up position.
1