Brother International PE-400D Users Manual - English - Page 105
If the power shuts off by itself while sewing
View all Brother International PE-400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Needle breaks Needle is not correctly inserted. Set needle properly. P.34 NO Machine does not start "START/STOP" button is not pressed. Press "START/STOP" button. P.23 NO Embroidery unit does not work Main power switch is in the off position. Turn the power on. P.12 NO LCD touch screen is hard to read LCD contrast is not correct. Adjust the LCD contrast. P.13 NO Correct needle is not used. Main power switch is in the off position. Change to proper needle. P.34 NO Turn the power on. P.12 NO Embroidery unit is not correctly connected to the machine. Connect embroidery unit properly to the machine. P.63 NO The combination of fabric, thread and needle is not correct. Check the "RELATED CHART OF SEWING FABRICS, THREAD AND NEEDLE" . P.35 NO Presser foot is not lowered. Lower the presser foot. P.21 NO Memory card is not inserted. Turn off the power then insert the memory card. P.65 NO The fabric is pulled too much. Sew without pulling but just guide the fabric. NO Check error messages. P.103~105 NO Incorrect foot being used. Stitch is too wide for foot being used. Narrow stitch or chante foot. NO Check error messages P.103~105 NO If you have gone through the troubleshooting tips and are still unable to find the source of the problem, please take your machine back to the place of purchase or your nearest Brother dealer for repairs. Note * This machine comes equipped with an upper thread sensor to prevent the machine from turning on if not properly threaded. If the machine doesn't start, check to see if the machine is threaded properly before worrying that something might be wrong. * If the power shuts off by itself while sewing: Turn sewing machine off and unplug it. Start the sewing machine again according to directions. 102