Brother International PE-400D Users Manual - English - Page 67
Removing embroidery unit - hoops
View all Brother International PE-400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removing embroidery unit 1. Remove embroidery hoop. Push " " key. Push " " key. The carriage will move to the storage position. CAUTION - If the carriage is not in the storage position, you might not be able to put the cover on the embroidery unit. - Always make sure to remove the hoop before pushing the " " key button. If you push " " key while the small hoop (sold separately) is still attached, the hoop will hit the foot and this could result in personal injury. 2. Turn the power off. Pull the embroidery unit to the left, and remove the unit while pushing the Release button. CAUTION Always turn the power off when removing the embroidery unit. Failure to do so could cause damage. 64
64
Removing embroidery unit
1.
Remove embroidery hoop. Push
“
”
key. Push
“
”
key. The carriage will move to the storage position.
CAUTION
–
If the carriage is not in the storage position, you might not
be able to put the cover on the embroidery unit.
–
Always make sure to remove the hoop before pushing the
“
”
key button. If you push
“
”
key while the small
hoop (sold separately) is still attached, the hoop will hit the
foot and this could result in personal injury.
2.
Turn the power off.
Pull the embroidery unit to the left, and
remove the unit while pushing the Release button.
CAUTION
Always turn the power off when removing the embroidery unit.
Failure to do so could cause damage.