Brother International PE-400D Users Manual - English - Page 47
Overcasting
View all Brother International PE-400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
OVERCASTING G J Caution Always be sure to use the right foot for the stitch you are sewing. Using the wrong foot could cause the needle to hit the foot while sewing, which could result in broken needles and possible injuries. 12 34 1 Over casting (Presser f oot "G") 2 Over casting (Presser f oot "G") 3 Elastic zigza g (Presser f oot "J") 4 Zig za g (Presser f oot "J") Overcasting G 5 3 For use on medium or lightw eight f abrics. Attach the G f oot. Keep foot guide along edge of f abric while sewing hem as illustrated in the drawing. 1 Guide CAUTION After the stitch width has been adjusted, turn the balance wheel by hand and check that the G needle does not touch the presser foot. If it does touch, the needle may break and cause an injury. Overcasting 5 3 G Combination str aight stitch and o vercast zigzag. Use on heavyweight f abrics. Attach G f oot. Keep foot guide along edge of fabric while sewing hem as illustrated in the dr awing. 1 Guide CAUTION After the stitch width has been adjusted, turn the balance wheel by hand and check that the G needle does not touch the presser foot. If it does touch, the needle may break and cause an injury. 44