Brother International PE-400D Users Manual - English - Page 20
CAUTION, If the spool is placed onto the pin in the wrong direction, the thread could entwine itself
View all Brother International PE-400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Set the thread spool. The thread end should come from the bottom front of the spool. The spool cap closest to the thread spool size should be used to hold the spool securely on the spool pin. 1 Spool cap 2 Spool CAUTION If the spool is placed onto the pin in the wrong direction, the thread could entwine itself around spool pin. If using a fine thread such as cross wound thread, slightly separate the spool cap (small) from the thread on the spool before using. 1 Spool cap (small) 2 Space 3 Cross wound thread 4. Pass the thread through the thread guide as shown by the arrows. Threading is easy if you hold the thread gently with your right hand while guiding the end of the thread with your left hand. 1 Run thread all the way through the thread guides as shown. 17