Home » Brother International Manuals » Sewing Machines » Brother International S-7200C » Manual Viewer

Brother International S-7200C Instruction Manual - English - Page 1

Brother International S-7200C Manual

Get Brother International S-7200C PDF manuals and user guides

View all Brother International S-7200C manuals

Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

S-7200C INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER

Section	Page
COVER	1
SAFETY INSTRUCTIONS	3
CONTENTS	7
1. MACHINE SPECIFICATIONS	8
2. NAMES OF MAJOR PARTS	9
3. INSTALLATION	10
3-1. Table processing diagram	11
3-2. Installation	11
3-3. Lubrication (-[]0[], []3[] specifications)	15
3-4. Connecting the cords	16
3-4-1. Opening the control box cover	16
3-4-2. Connecting the cords	16
3-5. Test operation (Operating the treadle)	21
4. PREPARATION BEFORE SEWING	22
4-1. Installing the needle	22
4-2. Removing the bobbin case	22
4-3. Winding the lower thread	23
4-4. Installing the bobbin case	23
4-5. Threading the upper thread	24
4-6. Adjusting the stitch length	25
4-7. Using the thread wiper (-4[][] specifications)	25
4-8. Using the knee lifter	25
5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS)	26
5-1. Names and functions	26
5-2. Sewing start and end backtack stitches	28
5-3. Sewing continuous backtack stitches	29
5-4. Sewing fixed stitches	30
5-5. Sewing name labels	31
5-6. Sewing pleat presser stitches	32
5-7. Using the lower thread counter	33
6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS)	34
6-1. Names and functions	34
6-2. Adjusting the needle up stop position	35
6-3. LOCK key	36
6-4. Resetting all settings to their defaults	37
7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS)	38
7-1. Names and functions	38
7-2. Sewing start and end backtack stitches	39
7-3. Sewing continuous backtack stitches	40
8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS)	41
8-1. Changing the needle stop position	41
8-2. Slow start	42
8-3. Correction sewing	43
8-4. Thread trimming lock	44
8-5. Setting the maximum sewing speed	45
8-6. Adjusting the needle up stop position	46
8-7. Lock function	47
8-8. Resetting all settings to their defaults	47
9. SEWING	48
9-1. Sewing	48
9-2. Backtacking	48
9-3. Sewing condensed stitches	49
10. THREAD TENSION	50
10-1. Adjusting the thread tension	50
10-2. Adjusting the presser foot pressure	51
10-3. Adjusting the trailing length after thread trimming	51
10-4. Adjusting the thread take-up amount (-[][]3 specifications)	52
11. CLEANING	53
11-1. Daily cleaning procedures	53
11-2. Applying grease (-[]3[], []5[] specifications*) [When “GrEASEUP” appears…When using the G50 operation panel]	56
11-3. Applying grease (-[]3[], []5[] specifications*) [When “GrUP” appears ... When using the G10 operation panel]	58
12. ADJUSTING THE ROTARY HOOK LUBRICATIONAMOUNT (-[]0[], []3[] specifications)	60
13. STANDARD ADJUSTMENTS	61
13-1. Adjusting the actuator switch position	61
13-2. Adjusting the safety switch position	62
13-3. Adjusting the thread take-up spring	63
13-4. Adjusting arm thread guide R	64
13-5. Adjusting the presser foot height	64
13-6. Adjusting of the feed dog height	65
13-7. Adjusting the feed dog angle	66
13-8. Adjusting the needle bar height	67
13-9. Adjusting the needle and feed mechanism timing	67
13-10. Adjusting the needle and rotary hook timing	68
13-11. Adjusting the treadle	69
13-12. Adjusting the presser foot floating amount (minute lifting amount)	69
14. TROUBLESHOOTING	70
14-1. Sewing	70
14-2. Error code displays	75
15. 7-SEGMENT DISPLAY	79

Match case Limit results 1 per page

S-7200C

Please read this manual before using the machine.

Please keep this manual within easy reach for quick reference.

SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER

WITH THREAD TRIMMER

INSTRUCTION MANUAL