Brother International S-7200C Instruction Manual - English - Page 49
Sewing condensed stitches, SEWING, <Setting>
View all Brother International S-7200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
9-3. Sewing condensed stitches 9. SEWING y If you press the actuator switch (1) or the reverse lever (2) while sewing is in progress, you can sew stitches (forward direction) with small stitch lengths. y Before carrying out sewing, set the stitch length for condensed stitches as follows. Sewing direction Condensed stitches 4226M 4227M Unlocked Locked 1. Lift up the dial lock lever (3) to release the lock. 2. Turn the stitch length dial (4) to the stitch length to be used for condensed stitches. 3. Tilt back the machine head. 4. Loosen the nut (5) and then turn the bolt (6) until its head is touching the solenoid lever (7). 5. Tighten the nut (5) to secure the bolt (6). 6. Return the machine head to its normal position. 1. Return the stitch length dial (4) to the stitch length for normal sewing. 2. Push down the dial lock lever (3) to engage the lock. 3. Start sewing. 4. At the position where you would like to start sewing condensed stitches, press the actuator switch (1) or the reverse lever (2). (Condensed stitches are sewn while the actuator switch (1) or reverse lever (2) is being pressed.) * To stop sewing condensed stitches, tighten the bolt (6) so that its head is not touching the solenoid lever (7). 4228M S-7200C 42