Brother International S-7200C Instruction Manual - English - Page 61
STANDARD ADJUSTMENTS, 13-1. Adjusting the actuator switch position
View all Brother International S-7200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
13. STANDARD ADJUSTMENTS 13. STANDARD ADJUSTMENTS CAUTION Maintenance and inspection of the sewing machine should only be carried out by a qualified technician. Ask your Brother dealer or a qualified electrician to carry out any maintenance and inspection of the electrical system. If any safety devices have been removed, be absolutely sure to re-install them to their original positions and check that they operate correctly before using the machine. Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries. Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught. Turn off the power switch and disconnect the power cord from the wall outlet at the following times, otherwise the machine may operate if the treadle is depressed by mistake, which could result in injury. ・ When carrying out inspection, adjustment and maintenance ・ When replacing consumable parts such as the rotary hook and knife If the power switch needs to be left on when carrying out some adjustment, be extremely careful to observe all safety precautions. 13-1. Adjusting the actuator switch position Back 4246M The installation position for the actuator switch (1) can be adjusted to or . Adjust so that it is in a position where it is easy to operate. 1. Remove the two screws (2). 2. Move the switch setting base (3) to move the actuator switch (1) to the preferred position or . 3. Tighten the two screws (2). < Actuator switch rotation function > Additionally, the actuator switch (1) can be rotated 90 degrees as shown in the illustration. Select the position that is easier to use. 4247M S-7200C 4248M 54