Brother International S-7200C Instruction Manual - English - Page 40
Sewing continuous backtack stitches, where it was interrupted.
View all Brother International S-7200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS) 7-3. Sewing continuous backtack stitches 3655M 1 Setting continuous backtack stitches Example: 4202M 2 If the treadle is simply depressed continuously, the number of stitches set for A, B, C and D will be sewn in a single cycle, the thread will be trimmed automatically and then the needle bar will stop in the needle up position. NOTE: ・ If the treadle is returned to the neutral position while continuous backtacking is being carried out, the sewing machine will stop at the point where the treadle returns to the neutral position.If the treadle is depressed again, operation will resume from the point where it was interrupted. ・ If thread trimming lock is set, the sewing machine will stop in the needle up position without thread trimming being carried out. 2159M 33 S-7200C