Brother International S-7200C Instruction Manual - English - Page 35

Adjusting the needle up stop position, USING THE G50 OPERATION PANEL ADVANCED OPERATIONS - service manual for

Get Brother International S-7200C PDF manuals and user guides View all Brother International S-7200C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS) 6-2. Adjusting the needle up stop position 1 4189M (While pressing the key (1), press the power ON switch.) 2 Selecting "UpoS xxx" "MorG xxx" will appear in orange in the main display (2). "xxx" is the setting value for the needle up stop position, and "0" is the default setting. (Setting value) (Press once) 3 Needle up stop position setting Example: 4190M • If you press the key, the setting value will increase and the needle up stop position will become lower. • If you press the key, the setting value will decrease and the needle up stop position will become higher. • The setting range is from -10 to 10. * A setting value of "10" corresponds to an angle of rotation of approximately 10° for the upper shaft. Becomes higher Becomes lower 4191M 2138M 2139M 4 The setting values will be memorized. 4192M 5 Normal sewing machine operation will then be possible. * For details on other adjustment items, refer to the Service Manual. 4193M S-7200C 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
S-7200C
6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS)
28
6-2. Adjusting the needle up stop position
1
(While pressing the
key (1), press the power ON switch.)
“MorG xxx” will appear in orange in the main display (2).
2
Selecting “UpoS xxx”
(Press once)
“xxx” is the setting value for the needle up stop position, and
“0” is the default setting.
3
Needle up stop position setting
•
If you press the
key, the setting value will increase
and the needle up stop position will become lower.
•
If you press the
key, the setting value will decrease
and the needle up stop position will become higher.
•
The setting range is from –10 to 10.
*
A setting value of “10” corresponds to an angle of rotation
of approximately 10
°
for the upper shaft.
4
The setting values will be memorized.
4192M
5
Normal sewing machine operation will then be possible.
4193M
* For details on other adjustment items, refer to the Service Manual.
4191M
2138M
2139M
Becomes higher
Becomes lower
4189M
(Setting value)
Example:
4190M