Brother International S-7200C Instruction Manual - English - Page 34

6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS) 6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS) The operations described in this section should only be carried out by a technician. 6-1. Names and functions These are used for making advanced operating settings. They should only be used by a technician. 4185M (19) Slow start key (21) Correction key (23) Needle up/down key • When this key is pressed so that the slow start icon (20) illuminates, the first two stitches sewn after the thread is trimmed are sewn at 700 rpm. After this, the sewing speed corresponds to the treadle depression amount. • If you press this key again while the icon (20) is illuminated, the icon (20) will turn off. 4186M • When this key is pressed so that the correction icon (22) illuminates, correction sewing can be carried out. If the sewing machine is stopped, sewing will be carried out at slow speed (220 rpm) while the actuator switch is being pressed. NOTE: • If you press the actuator switch while sewing is in progress, backtack stitches will be sewn. • Correction sewing cannot be carried out while the indicator of the pleat presser sewing key (8) is illuminated. • If you press this key again while the icon (22) is illuminated, the icon (22) will turn off. 4187M Use this key to select whether the needle bar stops in the up position or the down position when the treadle is returned to the neutral position and sewing stops. • When the needle up icon (24) is illuminated, the needle bar stops in the up position. • When the needle down icon (25) is illuminated, the needle bar stops in the down position. 4188M 2207M 2208M 27 S-7200C