Brother International S-7200C Instruction Manual - English - Page 25
Adjusting the stitch length, 4-7. Using the thread wiper (-4[][] specifications)
View all Brother International S-7200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4-6. Adjusting the stitch length Unlocked Locked 4. PREPARATION BEFORE SEWING 1. Push the dial lock lever (1) up until it clicks to release the lock. 2. Turn the stitch length dial (2) clockwise or counterclockwise so that the desired stitch length is at the uppermost position on the dial. The larger the number, the longer the stitch length will be. (The numbers on the dial are for use as a guide. The length of the finished stitches may vary depending on the type and thickness of material being sewn. Adjust while looking at the finished stitches.) When turning the stitch length dial (2) from a larger setting to a smaller setting, it will be easier to turn the dial if the reverse lever (3) is pushed to the halfwaydown position. 3. Push the dial lock lever (1) down firmly to lock it. * Check that the stitch length dial (2) does not rotate. 4156M 4-7. Using the thread wiper (-4[][] specifications) Press the thread wiper key (1) on the operation panel so that the indicator illuminates. If this is done, the thread wiper (2) will operate after the thread is trimmed. 4-8. Using the knee lifter 4157M The presser foot (2) can be raised by pressing the knee lifter plate (1). 4158M S-7200C 18