Canon CanoScan D1250U2F CanoScan D1250U2F Quick Start Guide - Page 16

Using the Scanner Buttons You can use the three convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the scanner before pressing a button. • To use these buttons, ScanGear CS-U, ScanGear Toolbox and ArcSoft PhotoBase should be installed from the CanoScan Setup Utility CD-ROM. SCAN Button To open the scanned image in the PhotoBase window 1. Press the [SCAN] button. 2. The scanner will scan the item. 3. The scanned image will appear in the PhotoBase window. E-MAIL Button To e-mail the scanned image as an attached file 1. Press the [E-MAIL] button. 2. The scanner will scan the item. 3. The [E-mail software selection] dialog will appear. Select an option from the list and click [OK]. • This step is required only for the first scan. 4. The e-mail software will start, and the scanned image will be attached in a new message window. COPY Button To print (copy) the scanned image with a printer 1. Press the [COPY] button. 2. The scanner will scan the item. 3. The scanned image will print. • The printer driver should be installed and the printer should be on-line to use this function. 5. Enter the receiver's address and title, write a message, confirm the required settings, and send the message. • MAPI compliant e-mail software, such as Outlook Express, Microsoft Outlook, Eudora or Netscape Messenger should be installed and enabled. With certain e-mail software, you should set the MAPI function on. • While scanning, you can change the default settings for scanning by clicking the [Cancel] button. For details on changing settings or arranging the scanner's button-tofunction assignment, refer to the ScanGear Toolbox User's Guide (electronic manual). 14 D1250U2F Quick Start Guide *D1250U2F_QSG_E 14 11/24/01, 7:19 AM