Canon CanoScan D1250U2F CanoScan D1250U2F Quick Start Guide - Page 18

on the document glass. - 35mm slide scanning

Page 18 highlights

Scanning Film 3. Attach the flap by aligning with the slots in the Flap film guide and press it down. To place the mounted 35mm film, remove the flap and place the 35 mm slide mount in the middle of the film guide. 4. Place the loaded film guide in the correct position on the document glass. Calibration Slot Align the film guide's mark with the scanner's mark. • Images will not scan correctly, or error messages will display, if the film guide is positioned incorrectly. Take care to position it correctly. • The film guide has a calibration slot used by the scanner to calculate the color balance. The film cannot be scanned with the correct color balance if this slot is obstructed. Keep it clear. 5. Close the document cover. 16 D1250U2F Quick Start Guide *D1250U2F_QSG_E 16 11/24/01, 7:19 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

D1250U2F Quick Start Guide
16
Scanning Film
3.
Attach the flap by aligning with the slots in the
film guide and press it down.
To place the mounted 35mm film, remove the flap and
place the 35 mm slide mount in the middle of the film
guide.
4.
Place the loaded film guide in the correct position
on the document glass.
Images will not scan correctly, or error messages will display, if the film guide is
positioned incorrectly. Take care to position it correctly.
The film guide has a calibration slot used by the scanner to calculate the color balance.
The film cannot be scanned with the correct color balance if this slot is obstructed.
Keep it clear.
5.
Close the document cover.
Align the film guide’s
mark
with the scanner’s
mark.
Calibration Slot
Flap
*D1250U2F_QSG_E
11/24/01, 7:19 AM
16