Canon Color imageCLASS X LBP1538C imageCLASS X LBP1538C Users Guide - Page 30

Setting Up Setting an IPv4 Address 7L3E-00J There are two methods to set an IPv4 address: allocating automatically using DHCP and entering manually. Select either of the two according to your environment. Conduct a connection test as necessary. Setting an IPv4 Address(P. 23) Conducting a Connection Test for an IPv4 Address(P. 24) Setting an IPv4 Address 1 Select on the screen. Screen(P. 81) 2 Select . 3 Select to enable IPv4 settings. 4 Select and set an IP address. ● You can also set both automatic retrieval and manual retrieval. If you set both and set to , the manually entered IP address is used when automatic IP address retrieval fails. Automatically assigning an IP address 1 Select . 2 Select . 3 Check that is set to . ● If is selected, change the setting to . 4 Select . ● If you press , the available IP address is automatically searched in the network (LAN) and the value for each item is allocated. This function allocates the IP address without using a DHCP server. However, communication outside of the router range is not available. ● In an environment where both and cannot be used, if either of the two is selected, useless communication occurs because the machine tries to check if the service is provided on the network. ● IP addresses assigned via DHCP override the address obtained via Auto IP. Setting by manual entry 1 Configure a setting to disable auto-acquisition. ● Select , and set both and to . 23