Canon Color imageCLASS X LBP1538C imageCLASS X LBP1538C Users Guide - Page 434
Step 3: Adjusting the Print Position for Each Paper Source, When the Print Position Is Lopsided
View all Canon Color imageCLASS X LBP1538C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 434 highlights
Maintenance ● The size of the marks for confirming the print position is indicated below. When the Print Position Is Lopsided Print position adjustment is required when the marks for confirming the print position are lopsided. The direction of the print position can be specified using a positive value (+) or negative value (-), and the distance can be specified in millimeters. To perform vertical adjustment, set a negative value (-) to move the print position up or a positive value (+) to move the print position down. To perform horizontal adjustment, set a negative value (-) to move the print position left or a positive value (+) to move the print position right. Vertical direction Horizontal direction In the following example, because it is necessary to shift the print position 3.5 mm up and 1.5 mm to the right, specify -3.5 mm in the vertical direction and +1.5 mm in the horizontal direction. Step 3: Adjusting the Print Position for Each Paper Source Adjust the print position after confirming the direction and distance for adjustment. The print position can be adjusted in the range -3.5 mm to +3.5 mm in both the horizontal and vertical directions, in 0.1 mm increments. 1 Select on the screen. Screen(P. 81) 427