Canon LV-7565 Serial Functional Specification
Canon LV-7565 Manual
 |
View all Canon LV-7565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon LV-7565 manual content summary:
- Canon LV-7565 | Serial Functional Specification - Page 1
LV-7565 EXPAND SERIAL FUNCTIONAL SPECIFICATION History of Modification Rev. Date 2004. 10.19 Page New Document Contents - Canon LV-7565 | Serial Functional Specification - Page 2
Name Definition...8 5. Functional Execution Command Table 9 5.1 Image Series Command Table 9 5.2. PC Control Command Table 9 5.3. Input Control Command Table 9 5.4. Screen Series Command Table 10 5.5. Lamp Series Command Table 10 5.6. Sound Series Command Table 10 5.7. Setting Series Command - Canon LV-7565 | Serial Functional Specification - Page 3
17 8.4.15. CF_COLMNLD Command 18 8.4.16. CF_TURBO Command 18 8.5. PC Control Series Command 18 8.5.1. CF_FSYNC Command 18 8.5.2. CF_TDOTS Command 18 8.5.3. 10. CF_HSCALE Command 26 8.7.11. CF_HPOS Command 26 8.8. Lamp Series Command 27 8.8.1. CF_LAMPH Command 27 8.8.2. CF_LAMPMODE Command - Canon LV-7565 | Serial Functional Specification - Page 4
Expand Serial Command Specification Page 3 of 46 8.10.1. CF_BBACK Command 28 8.10.2. CF_DISP Command 28 8.10.3. CF_LOGO Command 28 8.10.4. CF_CEIL Command 29 8.10.5. CF_REAR Command 29 8.10.6. CF_RCODE Command 29 8.10.7. CF_LANG Command 29 8.10.8. CF_ON-STA Command 30 8.10.9. CF_P-MANE - Canon LV-7565 | Serial Functional Specification - Page 5
40 9.8.4. CR_ANAMORPHIC Command 40 9.8.5. CR_VSCALE Command 40 9.8.6. CR_VPOS Command 41 9.8.7. CR_HSCALE Command 41 9.8.8. CR_HPOS Command 41 9.9. Lamp Series Status Read Command 41 9.9.1. CR_LAMPREPL Command 41 9.9.2. CR_LAMPMODE Command 41 9.9.3. CR_PROJH Command 42 9.10. Sound Series - Canon LV-7565 | Serial Functional Specification - Page 6
Expand Serial Command Specification Page 5 of 46 9.12.3. CR_FREEZE Command 45 9.12.4. CR_PTIMER Command 45 9.12.5. CR_INFPFAIL Command 45 9.12.6. CR_TEMPWARN Command 46 9.12.7. CR_TEMPFAIL Command 46 - Canon LV-7565 | Serial Functional Specification - Page 7
Functional Specification defines the Network Card and the communication functions for LV-7565. 1.2. A Projector firmware Ver. 1.x -ready 1.3. Commands are to communicate to Network card, but most commands control a remote Projector with PC installed RS232C. That's why commands are defined as expand - Canon LV-7565 | Serial Functional Specification - Page 8
3. Note for Communications 3.1. The expand command is defined one command / one line that starts "C" and ends carriage return (0x0D). 3.2. When a projector receives carriage return (0x0D), it starts decoding. 3.3. There are two type of Expand Serial Command, Functional Execution Commands and Status - Canon LV-7565 | Serial Functional Specification - Page 9
this time, it cannot process Command. Do not issue any commands. 4. Name Definition 4.1. Data from a controller to a projector is represented as Command, and data from a projector to a controller for the incoming command is represented as Responce. 4.2. [CR]: Carriage Return Code The Command ends - Canon LV-7565 | Serial Functional Specification - Page 10
the setting value on the image Specify serial for PC mode Store current PC Adj. status to Mode 1, 2, 3, 4, or 5. 5.3. Input Control Command Table Execute command CF_INPUT_%1 [CR] CF_SOURCE_%1 [CR] CF_INPUT1_%1 [CR] CF_INPUT2_%1 [CR] CF_INPUT3_%1 [CR] CF_INPUT4_%1 [CR] CF_SYSTEM_%1 [CR] Item Select - Canon LV-7565 | Serial Functional Specification - Page 11
Position 5.5. Lamp Series Command Table Execute command CF_LAMPH_%1 [CR] CF_LAMPMODE_%1 [CR] Item Reset Lamp total running time Select Lamp mode 5.6. function Set Logo function Set Ceiling function Set Rear function Select Remote control code Select OSD language. Set Power ON Start function Set - Canon LV-7565 | Serial Functional Specification - Page 12
value Read Color Temp. setting Read Noise Reduction setting Read Progressive setting Read Image setting Read Image Gamma setting Read Auto Picture Control setting Read Turbo Bright setting 6.2. PC Status Read Command Table Status read command CR_FSYNC [CR] CR_TDOTS [CR] CR_CLAMP [CR] CR_H-POS [CR - Canon LV-7565 | Serial Functional Specification - Page 13
[CR] CR_PROJH [CR] Item Read Lamp Replacement information Read Lamp mode Read Total Projector running time 6.7. Sound Status Read Command Item Read Blue Back setting Read Display setting Read Logo setting Read Remote Control Code setting Read OSD Language setting Read ON Start setting Read Power - Canon LV-7565 | Serial Functional Specification - Page 14
for anyspecific reason See the Error Code for its contents (3) When received an undecodable data Return "?" [CR]. 8.2. Transfer Example When setting projector total Command to 1344 by expand Command. PC ! PJ: "CF_TDOTS_1344" [CR] PC " PJ: "000" [CR Reception OK 8.3. Operating Condition When the - Canon LV-7565 | Serial Functional Specification - Page 15
setting value %1 "UP Color setting value +1 "DN Color setting value -1 Details Set the User control Color value. The value set by their Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (For Stand-by mode, this - Canon LV-7565 | Serial Functional Specification - Page 16
setting value %1 "UP Tint setting value +1 "DN Tint setting value -1 Details Set the User control Tint value. The value set by their Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (For Stand-by mode, this value - Canon LV-7565 | Serial Functional Specification - Page 17
"DN Color value for White Balance %1 determination -1 Details Set the user control color value by white balance %1 determination. The value set by their Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (For Stand-by - Canon LV-7565 | Serial Functional Specification - Page 18
value which is adjusted and saved by a user) %1 "STAND" --------- Standard When Input set in "Custom" is stored, so even if the Projector is set to AC Power Off and is turned on Control L1 %1 "L2 Select Auto Picture Control L2 "OFF Off Auto Picture Control Details Set Auto Picture Control - Canon LV-7565 | Serial Functional Specification - Page 19
"000" [CR] Unacceptable "Error Code" [CR] 8.5. PC Control Series Command 8.5.1. CF_FSYNC Command Command "CF_FSYNC_%1" [CR] "0000 ~ value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand - Canon LV-7565 | Serial Functional Specification - Page 20
. (Only valid when it is in the usual Power On state) The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand by mode stays) Note: When %1 is directly specified, this command is not enough - Canon LV-7565 | Serial Functional Specification - Page 21
will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to %1 is directly set by PC Control Command as below and Screen Control Command, the Command will not %1, content specified %1 by EXT No.6 (not XGA No.1) will be displayed. Acceptable Response "000" - Canon LV-7565 | Serial Functional Specification - Page 22
Network Viewer) Details Select Input. (Only valid when it is in the usual Power On state) The operation is the same as the Projector button or the Remote Control button "INPUT". Note1) When Network Unit is not installed, and Input-4 is selected, the response will be "103". Note2) When Input is set - Canon LV-7565 | Serial Functional Specification - Page 23
Expand Serial Command Specification Page 22 of 46 8.6.2. CF_SOURCE Command Command "CF_SOURCE_%1" [CR] Input: 1 "DIGITAL Select DVI Digital Input "ANALOG" -------- Select Analog Input "SCART Select Scart Input "HDCP Select DVI HDCP Input "OUT Select Monitor Out "VIDEO Select Composite - Canon LV-7565 | Serial Functional Specification - Page 24
Expand Serial Command Specification Page 23 of 46 8.6.5. CF_INPUT3 Command Command "CF_INPUT3_%1" [CR] "VIDEO Select Composite Video Input %1 "S-VIDEO" ------- Select S-Video Input "YPBPR Select Y/Pb/Pr Input Details Select Input-3 and specified source by %1 at the same time. (Only valid - Canon LV-7565 | Serial Functional Specification - Page 25
Serial Command Specification Page 24 of 46 8.7. Screen Control Command 8.7.1. CF_SCREEN Command Command "CF_SCREEN_%1" [CR] The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stay in Stand - Canon LV-7565 | Serial Functional Specification - Page 26
Change Keystone range. (Only valid when it is in the usual Power On state) When the range is over the maximum, a Projector accepts the Command, but it does not execute. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.7.6. CF_KYSTNMODE Command Command "CF_KYSTNMODE_%1" [CR - Canon LV-7565 | Serial Functional Specification - Page 27
Expand Serial Command Specification Page 26 of 46 8.7.8. CF_VSCALE Command Command "CF_VSCALE_%1" [CR] "032" ------- +32 "031" ------- +31 : "001" ------- +1 %1 "000" ------- 0 "-01" ------- -1 : "-31" ------- -31 "-32" ------- -32 Details Set V-Scale. (Only valid when it is in the - Canon LV-7565 | Serial Functional Specification - Page 28
Also, the Command directly sets the volume value. When setting volume value like Remote control unit operation, Sound Mute On will be canceled. The setting value will be stored in a Projector. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.2. CF_MUTE Command Command "CF_MUTE_ - Canon LV-7565 | Serial Functional Specification - Page 29
when it is in the usual Power On state) The value set by this Command is stored in EEEPROM. When All Off the Projector, the setting will valid. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.10.2. CF_DISP Command Command "CF_DISP_%1" [CR] %1 "ON" ------- Select Display "OFF - Canon LV-7565 | Serial Functional Specification - Page 30
%1" [CR] %1 "001 Select Code1 "002 Select Code2 Details Select Remote Control Code. (Only valid when it is in the usual Power On state) The value set by this Command is stored in EEEPROM. When All Off the Projector, the setting will valid. Acceptable Response "000" [CR] Unacceptable - Canon LV-7565 | Serial Functional Specification - Page 31
value set by this Command is stored in EEEPROM. When All Off the Projector, the setting will valid. Acceptable Response "000" [CR] Unacceptable "Error %1 "MAX Select maximum speed "NOR Select normal speed Details Change Fan Control speed. (Only valid when it is in the usual Power On state - Canon LV-7565 | Serial Functional Specification - Page 32
Expand Serial Command Specification Page 31 of 46 8.10.12. CF_KEYDIS Command Command "CF_KEYDIS_%1" [CR] "NONE RC and KEY are available %1 "RC Bar the use of RC "KEY Bar the use of KEY Details Set bar the use of RC / KEY. (Only valid when it is in the usual Power On state) Acceptable - Canon LV-7565 | Serial Functional Specification - Page 33
Total Dots of Projector by expand Commands. PC ! PJ: "CR_TDOTS" [CR] PC " PJ: "000_1344" [CR] 9.3. Operation Requirement Should be always operated. 9.4. Image Series Status Read Command 9.4.1. CR_BRIGHT Command Command "CR_BRIGHT" [CR] Details Read Bright value of user control Acceptable "000_ - Canon LV-7565 | Serial Functional Specification - Page 34
Expand Serial Command Specification Page 33 of 46 9.4.4. CR_TINT Command Command "CR_TINT" [CR] Details Read Tint value of user control Acceptable "000_%1" [CR] Response %1 Unacceptable "000" ~ "063" "Error Code" [CR] --- Invalid "?" [CR When receives unclear Command 9.4.5. CR_SHARP - Canon LV-7565 | Serial Functional Specification - Page 35
Expand Serial Command Specification Page 34 of 46 9.4.10. CR_COLTEMP Command Command "CR_COLTEMP" [CR] Details Read Color Temp setting status Acceptable "000_%1" [CR] Response "000" ~ "003" %1 "BLANK" ----- OSD menu is blank (Not XLow / Low / Mid / High) Unacceptable "?" [CR] 9.4.11. - Canon LV-7565 | Serial Functional Specification - Page 36
setting status Acceptable "000_%1" [CR] Response "L1" --------Auto Picture Control in operation with Level1 %1 "L2" --------Auto Picture Control in operation with Level2 " O F F " - - - - -Auto Picture Control is Off Unacceptable "?" [CR] 9.4.16. CR_TURBO Command Command "CR_TURBO" [CR - Canon LV-7565 | Serial Functional Specification - Page 37
Expand Serial Command Specification Page 36 of 46 9.5.4. CR_H-POS Command Command "CR_H-POS" [CR] Details Read Horizontal Position value Acceptable "000_%1" [CR] Response %1 "0000" ~ "nnnn" (nnnn = Total Dots - Display Dots) Unacceptable "Error Code" [CR] --- Invalid "?" [CR When receives - Canon LV-7565 | Serial Functional Specification - Page 38
Expand Serial Command Specification Page 37 of 46 9.5.9. CR_PCSTORE Command Command "CR_PCSTORE" [CR] Details Read the status if Mode1 - Mode5 is Free or Stored for PC Adjust. Each data Mode1 - Mode5 will be shown in 5 bytes. (F: Free, S: Stored) Acceptable "000_%1" [CR] Response "FFFFF" - Canon LV-7565 | Serial Functional Specification - Page 39
Expand Serial Command Specification 9.7. Input Series Status Read Command 9.7.1. CR_INPUT Command Command "CR_INPUT" [CR] Details Read selected Input No. Acceptable "000_%1" [CR] Response %1 "1" ~ "4" Unacceptable "?" [CR] Page 38 of 46 9.7.2. CR_SOURCE Command Command "CR_SOURCE" [CR] - Canon LV-7565 | Serial Functional Specification - Page 40
Expand Serial Command Specification 9.7.5. CR_SRCINP3 Command Command "CR_SRCINP3" [CR] Details Read Input 3 Source Acceptable "000_%1" [CR] Response "VIDEO Video mode status %1 "S-VIDEO" ------- S-Video mode status "YPBPR Y/Pb/Pr mode status Unacceptable "?" [CR] Page 39 of 46 9.7.6. - Canon LV-7565 | Serial Functional Specification - Page 41
Expand Serial Command Specification Page 40 of 46 9.8. Screen Series Status Read Command 9.8.1. CR_FLSCREN Command Command "CR_FLSCREN" [CR] Details Read the screen size status that Full Screen is selected or not. Acceptable "000_%1" [CR] Response %1 "ON" -------- Full Screen setting "OFF" - Canon LV-7565 | Serial Functional Specification - Page 42
Acceptable "000_%1" [CR] Response %1 "-64" ~ "064" Unacceptable "?" [CR] Page 41 of 46 9.9. Lamp Series Status Read Command 9.9.1. CR_LAMPREPL Command Command "CR_LAMPREPL" [CR] Details Read Lamp replacement time information Acceptable "000_%1" [CR] Response %1 "1Y" ------- Over the - Canon LV-7565 | Serial Functional Specification - Page 43
Read total Projector running time. (hours: (h)) Acceptable "000_%1" [CR] Response %1 "0000000" ~ "9999999" Unacceptable "?" [CR] Page 42 of 46 9.10. Sound Series Status Read Command 9.10.1. CR_VOLUME Command Command "CR_VOLUME" [CR] Details Read User control Volume value Acceptable - Canon LV-7565 | Serial Functional Specification - Page 44
%1 "ON Selected Logo "OFF Canceled Logo Unacceptable "?" [CR] 9.11.4. CR_RCODE Command Command "CR_RCODE" [CR] Details Read Remote Control Code setting status Acceptable "000_%1" [CR] Response %1 "001" ------- Selected Code1 "002" ------- Selected Code2 Unacceptable "?" [CR] 9.11 - Canon LV-7565 | Serial Functional Specification - Page 45
[CR] 9.11.9. CR_FANSPEED Command Command "CR_FANSPEED" [CR] Details Read selected Fan control speed Acceptable "000_%1" [CR] Response %1 "MAX" --------- Fan Control Speed Max. "NOR" --------- Fan Control Speed Normal Unacceptable "?" [CR] 9.11.10. CR_KEYDIS Command Command "CR_KEYDIS" [CR - Canon LV-7565 | Serial Functional Specification - Page 46
Expand Serial Command Specification Page 45 of 46 9.12. Other Status Read Command 9.12.1. CR_SIGNAL Command Command "CR_SIGNAL" [CR] Details Read information if there is signal or not Acceptable "000_%1" [CR] Response %1 "ON" -------- There is signal "OFF" ------- No signal Unacceptable - Canon LV-7565 | Serial Functional Specification - Page 47
[CR] means that sensor 1 is saftety %3 temperature, sensor 2 is exceeding critical temperature, and sensor 3 is safety temperature. Note) Depends on Projector models, when the temperature difference between sensor 1 and sensor 2 is over the specified temperature, the sensor may show "W". In this
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
 |
 |
LV-7565
EXPAND SERIAL FUNCTIONAL
SPECIFICATION
History of Modification
Rev.
Date
Page
Contents
2004. 10.19
New Document