Canon LV-7565 Serial Functional Specification - Page 12

Expand Serial Command Specification Page 11 of 46 6. Status Read Command Table 6.1. Image Series Status Read Command Table Status Read Command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR] CR_SHARP [CR] CR_GAMMA [CR] CR_WBAL-R [CR] CR_WBAL-G [CR] CR_WBAL-B [CR] CR_COLTEMP [CR] CR_NZRED [CR] CR_PROGV [CR] CR_IMAGE [CR] CR_IMGGMD [CR] CR_APCTRL [CR] CR_TURBO [CR] Item Read Brightness value Read Contrast value Read Color value Read Tint value Read Sharpness value Read Gamma value Read White Balance Red value Read White Balance Green value Read White Balance Blue value Read Color Temp. setting Read Noise Reduction setting Read Progressive setting Read Image setting Read Image Gamma setting Read Auto Picture Control setting Read Turbo Bright setting 6.2. PC Status Read Command Table Status read command CR_FSYNC [CR] CR_TDOTS [CR] CR_CLAMP [CR] CR_H-POS [CR] CR_V-POS [CR] CR_DDOTS [CR] CR_DLINE [CR] CR_ORGMODE [CR] CR_PCSTORE [CR] CR_SETPCADJ [CR] Item Read Fine Sync. value Read Total Dots value Read Clamo value Read Horizontal Position value Read Vertical Position value Read Display Dots value Read Display Line value Read base signal of PC mode Read if mode 1 to 5 for PC Adj. is Free or Stored Read PC signal for current PC display status 6.3. Video Status Read Command Table Status read command CR_SERSYS [CR] Item Read selected current signal. When in Auto mode, it returns a result by auto detect. 6.4. Input Status Read Command Table Status read command CR_INPUT [CR] CR_SOURCE [CR] CR_SRCINP1 [CR] CR_SRCINP2 [CR] CR_SRCINP3 [CR] CR_SRCINP4 [CR] CR_SYSTEM [CR] Read Input No. Read Input source Read Input 1 source Read Input 2 source Read Input 3 source Read Input 4 source Read System Item