Canon LV-7565 Serial Functional Specification - Page 19
CF_COLMNLD Command, 4.16. CF_TURBO Command, 5. PC Control Series Command, 5.1. CF_FSYNC
View all Canon LV-7565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Expand Serial Command Specification Page 18 of 46 8.4.15. CF_COLMNLD Command Command "CF_COLMNLD_%1" [CR] %1 "000" ~ "009" --------- Specify store area Details Call Color Management setting status from an area by %1 specification. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.16. CF_TURBO Command Command "CF_TURBO_%1" [CR] %1 "ON Set Bright SW to On "OFF Set Bright SW to Off Details Set Bright SW to the status by %1specification. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.5. PC Control Series Command 8.5.1. CF_FSYNC Command Command "CF_FSYNC_%1" [CR] "0000 ~ 0031" --------- Directly set Fine Sync setting value %1 "UP Fine Sync setting value +1 "DN Fine Sync setting value -1 Details Set Fine Sync. (Only valid when it is in the usual Power On state) The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand by mode stays) Note: When %1 is directly specified, this command is not enough to execute for the screen. To show up on the image, issue CF_SETPCADJ Command. Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series 8.5.2. CF_TDOTS Command Command "CF_TDOTS_%1" [CR] "nnnn ~ 9999 Directly set Total Dots value "nnnn" means minimum value. This is the total value %1 of current Display Dots + Horizontal Position. "UP Total Dots setting value +1 "DN Total Dots setting value -1 Details Set Total Dots. (Only valid when it is in the usual Power On state) The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand by mode stays) Note: When %1 is directly specified, this command is not enough to execute for the screen. To show up on the image, issue CF_SETPCADJ Command. Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series