Canon LV-7565 Serial Functional Specification - Page 22
CF_ORGMODE Command, 5.10. CF_PCSTORE Command, 6. Input Control Command, 6.1. CF_INPUT Command
View all Canon LV-7565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Expand Serial Command Specification Page 21 of 46 8.5.9. CF_ORGMODE Command Command "CF_ORGMODE_%1" [CR] %1 "XGA1", "HDTV1080" ... etc. Details After EXTn is set by PC Control series Command and CF_SETPCADJ Command such as CF_FSYNC / CF_TDOTS, this Command select original signal. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series 8.5.10. CF_PCSTORE Command Command "CF_PCSTORE_%1" [CR] "MODE1" --------- Store current PC Adjust status to MODE 1 "MODE2" --------- Store current PC Adjust status to MODE 2 %1 "MODE3" --------- Store current PC Adjust status to MODE 3 "MODE4" --------- Store current PC Adjust status to MODE 4 "MODE5" --------- Store current PC Adjust status to MODE 5 Details Store current PC Adjust status (each parameter status such as Total dots) to Mode1~5. This command operates the same operation as storing to Mode1~Mode5 in PC Adjust Menu. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series 8.6. Input Control Command 8.6.1. CF_INPUT Command Command "CF_INPUT_%1" [CR] "1 Select Input-1 %1 "2 Select Input-2 "3 Select Input-3 "4 Select Input-4 (Network Viewer) Details Select Input. (Only valid when it is in the usual Power On state) The operation is the same as the Projector button or the Remote Control button "INPUT". Note1) When Network Unit is not installed, and Input-4 is selected, the response will be "103". Note2) When Input is set to Monitor Out, and Input-1 is selected, the response will be "101". Acceptable Response "000" [CR] Unacceptable "%%%" [CR]