Canon LV-7565 Serial Functional Specification - Page 14
Error Code Table, Functional Execution Command, 1. Format, 2. Transfer Example, 3. Operating
View all Canon LV-7565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Expand Serial Command Specification Page 13 of 46 7. Error Code Table Error Code ? 000 101 102 103 Item *When receives data that cannot be decoded *Parameter determination error (Digit number error, and incorrect letter included) Normal Reception (Not error) The function is not available in the selected mode Selected the value is out of range (Selected value will not be reflected) Command mismatched to the Hardware (Command for unpopulated option function) 8. Functional Execution Command 8.1. Format (1) The following format's Commands issued from a PC. Pattern 1: "CF_COMMAND" [CR] Pattern 2: "CF_COMMAND_" %1 [CR] CF_: Header COMMAND: Letters %1: Parameter (Letters) _: Space (To separate Command and Parameter) (2) When a projector decoded a received data and ready to receive the next command, it will return acknowledgment. "000" [CR]: (0x06, 0x0D) When received Function Execute Command "nnn" [CR]: "000" unable to execute any value except for "000" value for anyspecific reason See the Error Code for its contents (3) When received an undecodable data Return "?" [CR]. 8.2. Transfer Example When setting projector total Command to 1344 by expand Command. PC ! PJ: "CF_TDOTS_1344" [CR] PC " PJ: "000" [CR Reception OK 8.3. Operating Condition When the Projector is in the following state, Function Execute Command will be limited. State Read Commands are available under the following state. Projector State Standby mode Count Down Cooling Down Cooling Down due to an unusual temperature Unusual temperature Abnormal State for Power Supply (60 seconds after this state occurs) Valid Function Execute Command C00: Power On C00: Power On (The Countdown is terminated) None None None None